There are two ways to update the edge firmware, manually uploading a file or via the web UI.
Downloading the New Firmware
- Go to our BlueCats App and log in with your BlueCats account https://app.bluecats.com/login
- On the left-hand side, click on the “Devices” tab
- Find your Edge and click on the “Settings” or the gear icon in the upper right corner
- Click and download the latest Edge and BLE firmware
Manually Uploading a File
Download the sysupgrade-compatible image file to your local machine.
Backup / Flash Firmware and then choose image file by clicking the choose file button in the ‘Flash new firmware image’ section. Uncheck the ‘Keep settings’ checkbox when flashing a major firmware revision. You can keep it checked for minor firmware updates. Click ‘Flash Image’ button to proceed.
Compare the checksum and the file size with the original file to ensure data integrity. Click ‘Proceed’ to start the flash process.
Wait a few minutes before you try to reconnect. Depending on your settings, it might be necessary to renew the address of your computer to reach the device again.
Using Web Interface
This requires the edge to be internet connected which you can do by configuring the WIFI as described in the getting started doc.
Then navigate to
Connect and Manage. If the ‘Device Register Status’ is ‘Registered’ then the edge device is successfully connected with the Bluecats cloud services. If the status is ‘Invalid’ or you need to re-register the device, refer registering the device.
Once registered in bluecats cloud, click ‘Update’ button on the ‘Update to Latest Edge Firmware’ section to update the edge to the latest firmware. Wait a few minutes before you try to reconnect. This update will not overwite your settings.
Updating BlueCats Edge Packages
Using Web Interface
There are two ways to update the BlueCats Edge packages to receive updates or after a firmware update. First is via the web GUI. This requires the Edge to be internet connected which you can do by configuring the WIFI as described in the getting started doc. Then you can navigate to
Software and then under the Actions tab there is an input box with ‘Download and install package’. You can then paste each of the following links one at a time and hit ‘OK’. This will download and install each of the packages.
Contact email@example.com for download urls for latest packages.
Note that this method only supports download via HTTP.
Download the package files to your local computer:
Use secure copy to transfer to the Edge:
scp path-to-your-files/luci-base.ipk firstname.lastname@example.org:~ scp path-to-your-files/luci-app-bluecats.ipk email@example.com:~
SSH into the Edge:
Then install the packages:
opkg install luci-base.ipk opkg install luci-app-bluecats.ipk